CONTROLLER TUNING FOR DISTURBANCE REJECTION ASSOCIATED WITH DELAYED DOUBLE INTEGRATING PROCESSES, PART II: I-PD CONTROLLER
DOI:
https://doi.org/10.53555/eijse.v6i3.61Keywords:
Disturbance rejection, delayed double integrating processes, I-PD controller, controller tuningAbstract
An I-PD controller is investigated for disturbance rejection associated with delayed double integrating processes. The controller is tuned using the MATLAB optimization toolbox and five different error-based objective functions for process time delay between 0.1 and 5 s. The more suitable objective function for disturbance rejection with the I-PD controller used with the delayed double integrating process is assigned and the effect of the process time delay on the performance of the control system in the time domain is shown. The unit step disturbance input time response of the control system has a maximum value less than 0.431, time of maximum time response less than 1.01 s and a settling time less than 15 s for time delay ≤ 1 s. The simulation results using the I-PD controller are superior when compared with other disturbance rejection techniques based on using PD-PI and PIDF controllers.
References
. M. Ogawa and T. Katarama, "A robust tuning method for I-PD controller incorporating a constraint on manipulated variable", Transactions of the Society of Instrument and Control Engineers, vol.E-1, Issue 1, pp.265-273, 2001.
. A. Paor, "on the control integrating and unstable processes with time delay", Journal of Electrical Engineering, vol.53, issue 7-8, pp.177-183, 2002.
. S. Skogestad, "Simple analytic rules for model reduction and PID controller tuning", Modeling, Identification and Control, vol.25, issue 2, pp.85-120, 2004.
. Q. Zheng and Z. Gao, "Motion control design optimization problem and solutions", International Journal of Intelligent Control and Systems, vol.10, issue 4, pp.269-276, December 2005.
. W. Chatrattanawuth, N. Suksariwattanagul, T. Benjanarasuth and J. Ngamwiwit, "Fuzzy I-PD controller for level control", SICE-ICASE International Joint Conference, Busan, pp.5649-5652, 18-21 October 2006.
. W. Sridokbuap et. al., "I-PD and PD controllers designed by CRA for overhead crane system", International Conference on Control, Automation and Systems, Seoul, pp.326-330, 17-20 October 2007.
. F. Gofarth and Z. Gao, "An active disturbance rejection control solution for hysteresis compensation", American Control Conference, Seattle, Washington, ThA126, 7 pages, June 11-13, 2008.
. G. Saravanakumar and R. Wahidabanu, "Control of integrating process with dead time using auto-tuning approach", Brazilian Journal of Chemical Engineering, vol.26, issue 1, pp.89-98, 2009.
. M. Namazov and O. Basturk, "DC motor position control using fuzzy proportional –derivative controllers with different defuzzification methods", Turkish Journal of fuzzy Systems, vol.1, issue 1, pp.36-54, 2010.
. V. Rajinikanth and K. Latha, "I-PD controller tuning for unstable system using bacterial foraging algorithm: A study based on various error criterion", Applied Comutational Intelligence and Soft Computing, vol.2012, Article ID 329389, 10 pages, 2012.
. S. Prasad, S. Varghese and P. Balakrishnan, "Optimization of I-PD controller for a FOLIPD model using particle swarm intelligence", International Journal of Computer Applications, vol.43, issue 9, pp.23-26, 2012.
. T. Shiota and H. Ohmori, "Design of adaptive I-PD systems using augmented error method", IFAC Conference on Advances in PID Control, Brescia, Italy, 5 pages, March 28-30, 2012.
. D. Cabecinhas, R. Cunha and C. Silvestre, "Experimental validation of a globally stabilizing feedback control for a quad rotor aircraft with wind disturbance rejection", American Control Conference, Washington, pp.1026-1031, June 17-19, 2013.
. G. A. Hassaan, "Robustness of I-PD, PD-PI and PI-PD controllers used with second-order processes", International Journal of Scientific and Technology Research, vol.3, issue 10, pp.27-31, 2014.
. S. Mazumder and S. Dutta, "Analytical study and designing of a I-PD controller for a third-order system using MATLAB simulation", International Journal of Engineering Research and General Science, vol.3, issue 1, pp.976-980, 2015.
. N. Yazdanparast, M. Shahbazian, M. Aghajani and S. Abed, "Design of nonlinear CSTR control system using active distribution rejection control optimized by asexual reproduction optimization", Journal of Automation and Control, vol.3, issue 2, pp.36-42, 2015.
. C. Mungan, "The use of important Taylor series for introductory physics", Latin American Journal of Physics Education, vol.3, issue 3, pp.535-538, September 2009.
. C. Lopez, MATLAB optimization techniques, Springer, 2014.
. F. Martins, "Tuning PID controllers using the ITAE criterion", International Journal of the Engineering Education, vol.21, issue 5, pp.867-873, 2005.
. C. Calistru and P. Georgescu, "Tuning of PID robust controllers based on ISE criterion minimization", 7th International Conference on Electro-mechanical and Power Systems, Iasi, Romania, October 8-9, 2009, pp.I-30 to I-35.
. S. Cheng and C. Hwang, "Designing PID controllers with a minimum IAE criterion by a differential evolution algorithm", Chemical Engineering Communications, vol.170, issue 1, pp.83-115, 1998.
. A. Marzoughi, H. Salamat, M. Rahmat and H. AbdulRahim, "Optimized PID controller for the exhaust temperature control of a gas turbine system using particle swarm optimization", International Journal of the Physical Sciences, vol.7, issue 5, , pp.720-729, 2012.
. G. A. Hassaan, "Controller tuning for disturbance rejection associated with a delayed double integrating process, Part I: PD-PI controller", International Journal of Computer Techniques, vol.2, issue 3, under publication, 2015.
. C. Anil and R. Sree, "Tuning of PID controllers for integrating systems using direct synthesis method", ISA Transactions, pp.1-9, March 2015.
Downloads
Published
Issue
Section
License
Copyright (c) 2020 EPH - International Journal of Science And Engineering (ISSN: 2454 - 2016)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
