THE RESEARCH OF HIGH-FREQUENCY POWER SUPPLY CONTROL SYSTEM BASED ON MSP430

Authors

  • Fan Yin Undergraduate Student School of Electrical and Information, Jiangsu University of Science and Technology, Zhenjiang, 212003, China.
  • Yuan jiang LI Associate professor School of Electrical and Information, Jiangsu University of Science and Technology, Zhenjiang, 212003, China
  • Jie Zhong Undergraduate Student School of Electrical and Information, Jiangsu University of Science and Technology, Zhenjiang, 212003, China.
  • Han Yu Undergraduate Student School of Electrical and Information, Jiangsu University of Science and Technology, Zhenjiang, 212003, China.
  • Jing Shao Undergraduate Student School of Electrical and Information, Jiangsu University of Science and Technology, Zhenjiang, 212003, China.
  • Yang Yu Undergraduate Student School of Electrical and Information, Jiangsu University of Science and Technology, Zhenjiang, 212003, China.
  • Yang Qing Undergraduate Student School of Electrical and Information, Jiangsu University of Science and Technology, Zhenjiang, 212003, China.

DOI:

https://doi.org/10.53555/eijse.v3i2.54

Keywords:

MSP430, High-frequency inverter power, PWM control, IGBT

Abstract

The development of power electronic devices is relatively slow. As a result, the development of the high-frequency inverter is extremely limited. This paper analyzes the characteristics of the IGBT and MSP430 and then designs a high-frequency inverter control circuit based on MSP430. The PWM control wave is outputted in software by MSP430, and the PWM wave is amplified by the driver circuit for driving the half-bridge inverter main circuit made up of two IGBT components. Controllability includes adjustable frequency, variable duty cycle and dead time variable and several other aspects of PWM waves. This design realizes reducing losses and improving the efficiency of the overall circuit purposes. Meanwhile, the other circuit configuration such as driver andprotection circuits in the entire system are also made some corresponding design description. Finally, the design of the control system is made further verification by IAR software download debugging. The final results prove that PWM control circuit based on drive and protection circuits can work and the frequency, duty cycle, dead time of the PWM can be adjusted. A brief analysis about the advantages and disadvantages of the entire circuit is reported and some improved methods are also presented at the end of this paper.

References

. Xie Yunyan. Design and development of power 30kVA digital inverter emergency power supply [D]. Electronic Science and technology, Hunan University, 2011

. Wang Juan. Design of three phase sine inverter power supply based on [D]. FPGA communication and information system of North China Electric Power University. 2009

. Chen. Design of high efficient emergency power supply structure for ships [D]. Zhejiang Ocean University, 2013

. cable: Digital single-phase inverter control technology research of Heilongjiang Institute of Science and Technology [D]. power electronics and power transmission.

. Baohong. Principle and application of MSP430 microcontroller: MSP430F5xx/6xx MCU entry, improve and development. Electronics Industry Press,.2014

. Li Pingfeng. The overview of modern power electronics technology [J]. mechanical management development. 2012

Downloads

Published

2017-06-27