COLLECTION OF MECHANISMS FOR 10 LINKS KINEMATIC CHAINS OF GROUP G
DOI:
https://doi.org/10.53555/ephijse.v7i4.181Keywords:
Kinematic Chain, Fixed Link, Equivalent Link, SCPC, MCPCAbstract
In this paper a new, easy, reliable, and efficient method to detect isomorphism and a catalogue of fixed link with its corresponding equivalent links in the distinct mechanisms of kinematic chains of Group-G, has been presented. It is helpful to the new researchers and designers to choose the best mechanism to perform the desired task at the conceptual stage of design. The proposed method is presented by comparing the structural invariants ‘sum of the absolute values of the characteristic polynomial coefficients’ [SCPC] and ‘maximum absolute value of the characteristic polynomial coefficient’ [MCPC] of [JJ] matrices. These invariants are used to detect isomorphism in the mechanism kinematic chain having simple joints. The method is explained with the help of examples of planar kinematic chain.
References
. Agrawal V.P. and Rao J.S. (1987). The Mobility Properties of Kinematic Chains”, Mech. Mach. Theory, 22, 497-504.
. Agrawal V.P.and Rao J.S. (1987). Structural Classification of Kinematic Chains and Mechanisms, Mech. Mach. Theory, 22, 489-496.
. Ambeker A. G. and Agrawal V. P. (1987). Canonical Numbering of Kinematic Chains and Isomorphism Problem: Min. Code”, Mech. Mach theory, 22, No 4, 453-461.
. Ambeker A. G. and Agrawal V. P.(1987).Identification of Kinematic Chains, Mechanisms, Path Generators and Function Generators Using Min. Codes, Mech. Mach theory, 22(4), 463-471.
. Gibson C.G. and Marsh D(1989) .On the Linkage Varieties of Watt 6-Bar Mechanisms-I. Basic Geometry” Mech. Mach. Theory, 24, 105-113.
. Hasan A.(2007). Systematic Development of Kinematic Chains and Mechanisms from a given Assortment of Links,Journal of Institution of Engineers (India), 88,15-19.
. Hasan A. (2007). Isomorphism in Kinematic Chains Using Path Matrix, Journal of Institution of Professional Engineers , New Zealand,1-4.
. Hasan A.(2009). Isomorphism and Inversions of Kinematic Chains up to 10 Links, Journal of ‘Institution of Engineers (India), 90, 10-14.
. Hasan A.(2009). Identification of Isomorphism among Kinematic Chains and Inversions Using Link Adjacency Values International J. of Mech. and Materials Engineering 4(3), .309-315.
. Hasan A., (2010). Application of Link Adjacency Values to Detect Isomorphism among Kinematic Chains”,Int. J. Mech. Mater. Design, , 6,157-162.
. Hasan A.(2011). Isomorphism Identification of Compound Kinematic Chain and Their Mechanism, imanager’s Journal on Mechanical Engineering, 2(1), 7-15.
. Hasan A.(2013). Determination of the Distinct Mechanisms from a Given Kinematic Chain, imanager’s Journal on Mechanical Engineering, 3(3), 8-14.
. Min Hwang and Yii – Wen Hwang (1992). Computer Aided Structural Synthesis of Planar Kinematic Chains with Simple Joints, Mech. Mach. Theory, 27, 189 – 199.
. Mohd A. (1998) .Kinematic chains structural modeling and correlation with machine performance, M Tech. Dissertation, IIT Delhi.
. Mruthyunjaya T. S. (1984). A Computerized Methodology for Structural Synthesis of Kinematic Chains, Part – 1, Formulation”, Mech. Mach. Theory, 19(6), 487 – 495.
. Mruthyunjaya T. S.(1984). A Computerized Methodology for Structural Synthesis of Kinematic Chains, Part – 2, Application to several fully or Partial Known Cases, Mech. Mach. Theory, 19(6), 497 – 505.
. Mruthyunjaya T.S. and Balasubramanium H.(1987). In Quest of Reliable and Efficient Computational Test for Detection of Isomorphism in Kinematic Chains, Mech. Mach theory, 22(4), 131139.
. Mruthyunjaya T. S. and Ruthven M. R. (1979).Structural Analysis of Kinematic Chains and Mechanisms based on Matrix representation”, Transaction of the ASME, Journal of Mechanical Design, 101, 488 – 518.
. Raicu A. (1974). Matrices Associated with Kinematic chains from 3 to 5 Members”, Mech. Mach. Theory, 9, 123 – 129.
. Rao A.C. (1989). Selection of Ground, Input and Output Link in Mechanisms, A Quantitative Approach, Trans, CSME, 13(1/2), 23-30.
. Rao A. C (1997). Hamming Number Technique – 2, Generation of n planer kinematic Chains, Mech. Mach. Theory, 32(4), 489-499.
. Rao A. C (2000)]. Application of Fuzzy Logic for the Study of Isomorphism, Inversions, Symmetry, Parallelism and Mobility in Kinematic Chains, Mech. Mach. Theory, 35, 1103-1116.
. Srinath A. and Rao A.C. (2006).Synthesis of Planar Kinematic Chains, Institution of Engineers (I), 86, 195-201.
. Rao A. C. and Rao C. N(1993). Loop Based Pseudo Hamming Value-I, Testing Isomorphism And Rating Kinematic Chain., Mech. Mach. Theory, 28(1), 113- 127.
. Rao A. C. and Rao C. N(1993). Loop Based Pseudo Hamming Value-II, Inversions, Preferred Frames and Actuators, Mech. Mach. Theory, 28(1), 129- 143.
. Rao A. C., Pratap and B. Deshmukh (2001).Computer Aided Structural Synthesis of Planer Kinematic Chains Obviating the Test of Isomorphism. Mech. Mach. Theory, 36, 489-506.
. Tuttle E.R (1975). Generation of Planar Kinematic Chains, Mech. Mach. Theory, 31, 729 – 748.
. Uicker J. J. and Raicu A. (1975). A method for the Identification and Recognition of Equivalence of Kinematic Chains, Mech. Mach. Theory, 10, 375 – 383.
. Yadav J. N. , Pratap C. R.and Agrawal V. P. (1996), Mechanisms of a kinematic chain and degree of structural similarity based on the concept of link – path code”, Mech. Mach. Theory, 31, 865 – 871.
. Yan H. S. and Hall A. S. (1982). Linkage Characteristic Polynomials: Assembly Theorems, Uniqueness, ASME Journal of Mechanical Design, 104, pp. 11-20.
. Yan and Hwang (1991). Specialization of Mechanisms, Mech. Mach. Theory, 26 (6), 341-351.
. Zhang W. J. and Li Q.(1999). A New Approach to Mechanism Topology Identification, ASME, Journal of Mechanical Design, 121, pp. 57-64.
Downloads
Published
Issue
Section
License
Copyright (c) 2021 EPH - International Journal of Science And Engineering (ISSN: 2454 - 2016)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
