BIBLIOGRAPHY AND LITERATURE REVIEW ON BUCKLING OF LAMINATED PLATES
DOI:
https://doi.org/10.53555/eijse.v2i3.166Keywords:
Literature review, Buckling, Composites, Laminated plates, BibliographyAbstract
The effects of boundary conditions and lamination arrangements (i.e. stacking sequence and orientation of a lamina) were found to be important factors in determining a suitable exact, analytical or semi – analytical method for analyzing buckling loads on laminated plates. It was also found that: as the derivative order of shear deformation increases, the accuracy of stresses, strains, buckling loads … etc. increases and it doesn't need shear correction factors
References
. Singer J., Arbocz J., Wetter T., 'Buckling experiments: Experimental methods in buckling of thin walled structures: shells, Built up structures, composites and additional topics', vol.2. , New York: John Willey and sons; (2002).
. Reddy J.N., second edition,' Mechanics of laminated composite plates and shells', Boca Raton CRC press; (2004).
. Whitney J.M.,' Structural analysis of laminated anisotropic plates', Lancaster, PA: Technomic Publishing; (1987).
. Reddy J.N.,' Mechanics of laminated composite plates: theory and analysis', Boca Raton: CRC press; (1997).
. Leissa A.W., Kang J.,' Exact solutions for vibration and buckling of an SS – C – SS – C rectangular plate loaded by linearly varying in – plane stresses', International Journal of mechanical sciences;(2002),44:PP.1925 – 1945.
. Bao G., Jiang W., Roberts J.C.,' Analytic and finite element solutions for bending and buckling of orthotropic rectangular plates', International Journal of solids and structures ; (1997),34(14),PP.1792 – 1821.
. Robinson J.R.,' The buckling and bending of orthotropic sandwich panels with all edges- simply supported', Aero Q; (1955), 6(2):PP. 125.
. Baharlou B., Leissa A.W.,' Vibration and buckling of generally laminated composite plates with arbitrary edge conditions', International Journal of mechanical sciences;(1987),29(8):PP.545– 555.
. Dawe D.J., Wang S.,' Spline finite strip analysis of the buckling and vibration of rectangular composite laminated plates', International Journal of mechanical sciences; (1995),37(6):PP.645 – 667.
. Liu G.R., Chen X.L., Reddy J.N.,' Buckling of symmetrically laminated composite plates using the element free Galerkin method', International Journal of structural stability dynamics; (2002), 2(3):PP.281 – 294.
. Bert C.W., Malik M.,' Differential quadrature: A powerful new technique for analysis of composite structures', composite structures; (1997),39(3– 4):PP.179 – 189.
. Huang Y.Q., Li Q.S.,' Bending and buckling analysis of anti – symmetric laminates using the least square differential quadrature method', Computer methods in applied mechanics and engineering, 193; (2004):PP.3471 – 3492.
. Kim Y.S., Hoa S.V.,' Biaxial buckling behaviour of composite rectangular plates', composite structures; (1995), 31(4):PP.247 – 252.
. Shufrin I., Rabinovitch O., Eisenberger M.,' Buckling of symmetrically laminated rectangular plates with general boundary conditions – A semi analytical approach', composite structures; (2007).
. Kerr A.D.,' An extended Kantorovich method for solution of Eigen value problem', International Journal of solids and structures; (1969),5 (7):PP.559– 572.
. Eisenberger M., Alexandrov A.,' Buckling loads of variable thickness thin isotropic plates', thin – walled structures; (2003), 41(9):PP.871 – 889.
. Shufrin I., Eisenberger M.,' stability and vibration of shear deformable plates – first order and higher order analyses', International Journal of solid structures; (2005), 42(3 – 4):PP.1225 – 1251.
. Ungbhakorn V., singhatanadgid P.,' Buckling analysis of symmetrically laminated composite plates by extended Kantorovich method', Composite structures; (2006); 73(1):PP.120 – 128.
. Yuan S., Jin Y.,' Computation of elastic buckling loads of rectangular thin plates using the extended Kantorovich method', computer structures; (1998), 66(6):PP.861 – 867.
. March H.W., Smith C.B.,' Buckling loads of flat sandwich panels in compression', Forest products research laboratory report No.1525, Madison, WI; (1945).
. Chang C.C., Ebcioglu I.K., Haight C.H.,' General stability analysis of orthotropic sandwich panels for four different boundary conditions', Zeitschr Angew, Math. Mech.; (1962), 43:PP.373 – 389.
. Jiang W., Bao G., Roberts J.C.,' Finite element modeling of stiffened and unstiffened orthotropic plates', Computer and structures Journal; (1977), 63(1):PP.105 – 117.
. Smith C.S.,' Design of marine structures in composite materials', Amsterdam: Elsevier science publishers Ltd; (1990).
. Cook R.D.,' Concepts and applications of finite element analysis', New York: Wiley; (1981).
. Yang H.T.Y., Saigal S., Masud A., Kapania R.K.,' A survey of recent shell element', International Journal for numerical methods in engineering,47 (1–3); (2000):PP.101 – 127.
. Mindlin R.D.,' Influence of rotatory inertia and shear on flexural motions of isotropic elastic plates', Trans. ASME Journal of applied mechanics; (1951), 18:PP.31 – 38.
. Reddy J.N.,' A refined non – linear theory of laminated plates with transverse shear deformation', International Journal of solids and structures; (1984), 51:PP.319 – 330.
. Soladatos K.P.,' A transverse shear deformation theory for homogeneous monoclinic plates', Acta Mech.; (1992), 94:PP.195 – 220.
. Touratier M.,' An efficient standard plate theory', International Journal of engineering sciences; (1991), 29(8):PP.901 – 916.
. Di Sciuva M.,' An improved shear deformation theory for moderately thick multi – layered anisotropic shells and plates', Journal of applied mechanics; (1987), 54: PP. 589 – 596.
. Cho M., Parmerter R.R.,' Efficient higher – order composite plate theory for laminated composites', AIAA Journal; (1993), 31 – 7:PP.1299 – 1306.
. Karama M., Afaqk S., Mistou S.,' Mechanical behavior of laminated composite beam by the new multi – layered laminated composite structures model with transverse shear stress continuity', International Journal of solids and structures;(2003),40:PP.1525 – 1546.
. Jones R.M.,' Buckling and vibration of unsymmetrical laminated cross – ply rectangular plates', AIAA Journal; (1973), 12(11), PP. 1626 – 1632.
. Narita Y., Leissa W.L.,' Buckling studies for simply supported symmetrically laminated rectangular plates', Composite structures; (1989), 12:PP.113 – 132.
. Lo K.H., Christensen R.M., Wu E.M.,'A high – order theory of plate deformation', part 1: homogeneous plates, Journal of applied mechanics, Trans. ASME; (1977), 44(4):PP.663 – 668.
. Reddy J.N.,' An evaluation of equivalent single layer and layer wise theories of composite laminates', Composite structures; (1993), 25: PP.21– 35.
. Librescu L.,' Electrostatics and kinetics of anisotropic and heterogeneous shell – type structures', Noordhoff: Leyden; (1975).
. Schmidt R.,' A refined non – linear theory of plates with transverse shell deformation', Journal of India mathematical society; (1977), 27(1):PP.23 – 38.
. Krishna Murty A.V.,' Higher order theory for vibration of thick plates', AIAA Journal; (1977), 15(12):PP.1823 – 1824.
. Levinson M.,' An accurate simple theory of the statics and dynamics of elastic plates', Mechanical research community; (1980), 7(6): PP.343 – 350.
. Seide P.,' An improved approximate theory for the bending theory of laminated plates', Mechanics today; (1980), 5:PP.451 – 466.
. Murthy M.V.V.,' An improved transverse shear deformation theory for laminated anisotropic plates', Nasa technical paper, 1903; (1981), PP.1 – 37.
. Bhimaraddi A., Stevens L.K.,' A higher – order theory for free vibration of orthotropic, homogeneous, and laminated rectangular plates', Journal of applied mechanics; (1984), 51:PP.195– 198.
. Mallikarjuna, Kant T.,' A critical review and some results of recently developed refined theories of fibers – reinforced laminated composites and sandwich plates', Composite structures ; (1993),23:PP.293 – 312.
. Kant T., Pandya,' A simple finite element formulation of higher – order theory for unsymmetrical laminated composite plates', Composite structures; (1988), 98, PP.215 – 224.
. Reddy J.N.,' An evaluation of equivalent single layer and layer wise theories of composite laminates', Composite structures; (1993), 25: PP. 21 – 35.
. Noor A.K., Burton W.S.,' Assessment of computational models for multi – layered anisotropic plates', Composite structures; (1990), 14:PP.233 – 265.
. Bert C.W.,'A critical evaluation of new plate theories applied to laminated composites', Composite structures ; (1984),2:PP.329 – 347.
. Kant T., Kommineni J.R.,' Geometrically non – linear analysis of symmetrically laminated composite and sandwich shells with higher – order theory and Co finite elements', composite structures; (1984), 27: PP.403 – 418.
. Reddy J.N., Robbins Jr D.H.,' Theories and computational models for composite laminates', Applied mechanics review, part 1; (1994), 47(6):PP.147 – 165.
. Khdeir A.A.,' Free vibration and buckling of unsymmetrical cross – ply laminated plates using a refined theory', Journal of sound and vibration; (1989), 128: PP.377 – 395.
. Hadian J., Nayfeh A.H,' Free vibration and buckling of shear deformable cross – ply laminated plates using state – space concept', Computer and structures;(1993),4:PP.677 – 693.
. Fares M.E., Zenkour A.M.,' Buckling and vibration of non – homogeneous composite cross – ply laminated plates with various plate theories', Composite structures; (1999), 44:PP.279 – 287.
. Matsunaga H.,' Vibration and stability of cross – ply laminated composite plates according to a global higher – order plate theory', composite structures; (2000), 48:PP.231 – 244.
. Gilat R., Williams T.O., Aboudi J.,' Buckling of composite plates by global – local plate theory', Composite part B – Engineering; (2001), 32:PP.229 – 236.
. Pagano N.J.,' Exact solution for rectangular bi – directional composite and sandwich plates', Journal of composite materials; (1970), 4: PP.20 - 34.
. Noor A.K.,' Stability of multi – layered composite plates', Fiber science technology; (1975), 8: PP.81 – 89.
. Gu H., Chattopadhyay A.,' Three – dimensional elasticity solution for buckling of composite laminates', Composite structures; (2000), 50: PP.29 – 35.
. Reddy J.N.,' An evaluation of equivalent single layer and layer wise theories of composite laminates', Composites structures; (1993), 25: PP.21 – 35.
. Leissa A.W.,' Conditions for laminated plates to remain flat under in – plane loading', Composite structures; (1986), 6:PP.261 – 270.
. Qatu M.S., Leissa A.W.,' Buckling of transverse deflections of unsymmetrically laminated plates subjected to in – plane loads', AIAA Journal; (1993),31(1):PP.189 – 194.
. Bazant Z.P., Gedolin L.,' Stability of structures', New York: Oxford University press; (1991).
. Column research committee of Japan,' Handbook of structural stability', Tokyo: Corona; (1971).
. Su G.H., Xiang y.,' A non – discrete approach for the analysis of plates with multiple sub domains', Engineering structures, 24; (2002):PP.563 – 575.
Downloads
Published
Issue
Section
License
Copyright (c) 2016 EPH - International Journal of Science And Engineering (ISSN: 2454 - 2016)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
